English
Latviešu
Русский
Eesti
Lietuvos
Suomi
SteelDigi Azure Cheyenne PS5, White
SKU: PS5-CC02W
About this item
- Charge two PS5 DualSense controllers simultaneously, letting you get back to your game faster; controllers are not included
- Holding deck for 10 game boxes
- Fast cooling fan speed: up to 3200 rpm
- Included with the Multifuncional Stand: charging Cable (USB to USB-C) allows flexibility in setup
- The cooling fan is equipped with power off memory, and the base cannot only reduce the working temperature of PS5 console while charging the PS5 controller, but also act as a compatible PS5 controller base. This product can effectively reduce the temperature of PS5 console, improve console performance and decrease power loss. The fan control switch of this product is the single-key self-reset key switch, in which the intelligent chip control is adopted. By pressing this switch slightly, you can make the fan switched in four gears by turns. The rotating speed can be switched or the fan can be turned off through every short-pressing of the switch (four gears of the fan are rapid gear, medium speed gear, low speed gear and OFF gear), and they are indicated by four work indicating lights: red light, orange light, green light and extinguished light. It can be switched manually at will based on ambient temperature. The air circulation of the console system can be accelerated to effectively prevent overtemperature of the console, reduce the power consumption of the whole machine and prolong the life of the console.
- The intelligent MCU chip is also capable in power off memory. It will remember the status in the last power outage and maintain the operation state of the fan before power off. Two charging slots are set up in the front end of the base to charge the original PS5 console. You can put the PS5 controller on the center of the charging slot of heat-dissipation base at certain angle for charging. When the controller is under charging, you will see the orange breathing light on front of the controller; after being fully charged, the orange breathing light will go out (note: the orange breathing light shall only be on when the controller is not connected to the console; if the controller has been connected to the console, only white long-on light will be emitted by the controller under charging; if the controller under playing is being charged, the blue and white light will be emitted by the controller); 10 boxes of game CD can be put on the leftside of this base simultaneously.
- One built-in fan can accelerate the air conditioning of the PS5 console bottom to achieve the objective of heat dissipation.
- The fan control switch on the left side can be switched in four gears (rapid gear, medium speed gear, low speed gear and stop gear); the intelligent chip control is adopted with the function of power off memory.
- There are 10 CD slots and one remote-control unit placementslot on the back of this product, where users can place 10 favorite game CD cases.
- The Y-type charging cable is provided along with this product, which can provide power from two USB 3.0 ports on the back of the PS5 console, no additional power supply is required.
- Two original PS5 controllers can be charged simultaneously by this product. When the controller is under charging, you will see the orange breathing light on front of the controller; after being fully charged, the orange breathing light will go out (note: the orange breathing light shall only be on when the controller is not connected to the console; if the controller has been connected to the console, only white long-on light will be emitted by the controller under charging; if the controller under playing is being charged, the blue and white light will be emitted by the controller).
| Brand | SteelDigi |
|---|---|
| Weight | 1kg |
TYPE-C input voltage and current: 5V 3A (the power is supplied directly from two USB3.0 ports on the back of the console through the attached Y-type USB cable)
Output voltage and current of charging interface of the slot: 5V 2.0A
Maximum rotating speed of the fan: rapid gear: 3200±320 rpm; medium speed gear: 2500±350 rpm; low speed gear: 2100±210 rpm; one built-in cooling fan
Charging duration it takes about 3 hours to fully charge the slot
Product length * width * height 280*270*60MM
Product material ABS + hardware base-plate
Accessories 1 Y-type USB2.0-to-TYPE-C charging cable
0.0
overall
(0 customer reviews)
There are no reviews yet.